W5500S2E-Z1 serial to Ethernet module
W5500S2E-Z1 user manual
Introduction
W5500S2E-Z1 is an industrial grade serial to Ethernet module. It supports TCP server, TCP client and
UDP three operating modes. The maximum serial baud rate is 1.152Mbps. W5500S2E-Z1 supports
WIZS2E ConfigTool (Configuration Tool for Windows®), web page configuration and AT command to
configure the module.
W5500S2E-Z1 uses the hardwired TCP/IP protocol Ethernet chip W5500. This enable a faster, stable and
secure Ethernet connectivity. With reference schematic(s) and guideline(s) in this user manual, it could
be greatly reduced the time and difficulty of the hardware design and development when comparing with
other approaches.
Features
1.2kps ~ 1.152Mbps baud rate
10/100 Mbps Ethernet interface
Support TCP server, TCP client and UDP operating modes
Flexible serial interface data packaging condition settings
Smart Ethernet cable detection and keep alive features
As DHCP client to automatically acquire IP address
As DNS client to lookup domain name
Support NetBIOS allows user to identify module’s name
Support user password authorization for security
Support serial AT command configuration method
Built-in web server for browser and remote configuring
Provide user-friendly configuration tool program (WIZS2E ConfigTool)
Support local and remote firmware upgrade
Specification
32-bit ARM MCU
Serial interface
o
3.3V TTL x1: TXD, RXD, GND
Default Serial communication parameters
o
Baud Rate: From 1.2kbps to 1.152Mbps
o
Data Bit: 7, 8
o
Stop Bit: 0.5, 1, 1.5, 2
o
Parity: None, Even, Odd
o
Flow Control: None, CTS/RTS
Power supply
o
Input Power: 5V DC
Size
o
44.45 x 31.75 x 15.75 (mm)
Operating temperature
O
Industrial Grade: -40 ~ +85 ℃
Storage environment
O
-40 ~ +85 ℃, 5 ~ 95% RH
