\Handouts\CMCConvertibleStand
02/15/08
--
Wizard™ International, Inc., 4600 116th St. SW, PO Box 66, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350
wizardint.com
Attach Board Stop/Extender
Take note which Board model you are assembling the Convertible Stand for, and follow the appropri-
ate directions below.
Board Stops for the 8000/8500
Attach the same Board Stops you removed earlier, to the bottom end of the Cradle Sides (Fig A-B),
using the screw and collar that you removed earlier. Make sure the “feet” of the Board Stops are
facing upward, as the CMC will be resting against them (Fig B).
Fig A.
Fig B.
Fig A: Install the Board Stops to the end of the Cradle Sides. Fig B: Board Stops installed.
Board Extenders for the 8500e
For the 8500e, you will use the longer Board Extenders (Fig A), located in Box #2 - Computer Box.
Attach the long Board Extenders to the bottom end of the Cradle Sides, using the bolt and nut that
are included with the Extender. Make sure that the “V” of the Board Extender is facing upwards, as
the CMC will be resting against them.
Fig A.
Fig A: Board Extenders for the 8500e.