Witura WT-1672B, User Manual

Page: 5 / 16

WITURA TECHNOLOGY SDN BHD | WT ‐ 1672B GSM Wireless Alarm System User Manual V2.0 5
Step 2 ‐ Advance Set Up
NO. Description Programming Code SMS Texts Respond Function
1 First Step of programming, you must
enter the factory passwords of 1234
and go inside the programming
mode.
You only can perform the next
commands after enter into
programming mode
*0*1234# You get administrator
privileges!
2013 ‐ 10 ‐ 09 00:33 Wed
When you enter *0*1234#, you
enter into the programming
mode. You must perform the
next command in 10 minutes. If
you did not do anything, the
system will exit from
programming mode.
2 Change Password *0*1234*new password#
For example if you need to
change to the new PW of 1212.
*0*1234*1212#
New password<1212>
2013 ‐ 10 ‐ 10 16:07 Thu
Maximum 4 digits of passwords
If you decide to protect your
privacy, you can change the
factory password to your new
password.
Enter the factory password
follow by your new password.
3 Add telephone number into the
admin list.
*1*1*telephone number#
For example set Admin number
18617185300 into admin 2
*1*2*18617185300#
Administrator:
1: 15989427391
2: 18617185300
3:
4:
5:
2013 ‐ 10 ‐ 10 16:08 Thu
Set Admin Numbers ;
*1*1* ‐ set 1st admin number
*1*2* ‐ set 2nd admin number
*1*3* ‐ set 3rd admin number
*1*4* ‐ set 4th admin number
*1*5* ‐ set 5th admin number
Only the number in the list can
receive alarm texts message and
active the relay output.
You can add up to 5 telephone
number into the admin list.
4 Check phone number you
program in the list
*2* Administrator:
1: 15989427391
2: 18617185300
3:
4:
5:
2013019019 16:09 Thu
5 Delete the admin number in the list. *3*N#
N = Admin number 1 ‐ 5
For example, if you want to
delete admin no 2.
just enter *3*2#
Administrator:
1: 15989427391
2:
3:
4:
5:
2013019019 17:16 Thu
Delete Admin Number
Delete 1st admin *3*1#
Delete 2nd admin *3*2#
Delete 3rd admin *3*3#
Delete 4th admin *3*4#
Delete 5th admin *3*5#