Witura WT-1041 User Manual Download Page 25

Page: 25 / 26

WT-1041 3G Camera

WT-1041 – User Manual – Rev.1.2 - Technical Support:

[email protected]

Possible reason

Measurement

Not connect the charger to the product
correctly .

Please make sure that charger has
connected to the product correctly and insert
the socket for at least 3 hours.

_____

Please close the power , disconnect the
charger and restart the product after 10
seconds.

Possible reason

Measurement

_____

Please close the power , disconnect the
charger and restart the product after 10
seconds.

Possible reason

Measurement

_____

Please close the power, disconnect the
charger, reconnect the charger to the
product and then Power on the device. If the
charger isn’t connected to the product,
please try it again after fully charged.

Possible reason

Measurement

The power switch is switched to Off from
On due to failling.

Please check the power switch, and switch
on the power again.

Battery Indicator Lights Red And Flash Quickly

Message Fails To Feedback

The Device Can’t Be Powered On By Pushing Upward The Power Switch

The Device Falls To The Ground And Is Powered Off Automatically

Summary of Contents for WT-1041



























Search results

Summary of Contents for WT-1041

Reviews:

Brands by name

Popular brands

Witura WT-1041, User Manual

Search results

Summary of Contents for WT-1041

Reviews:

Brands by name

Popular brands