17
WT-1041 3G Camera
WT-1041 – User Manual – Rev.1.2 - Technical Support:
COPYRIGHT ©2009 WITURA CORPORATION SDN BHD
The host and share number can make WT-1041 3G Camera to take photo (one time) via
message. Before doing this, make sure the T card been inserted properly in the device.
After successfully taking, the device will send back the photo through MMS. To receive
the MMS, please enable the Host/ Share number’s MMS function and make sure it work
correctly.
1.
Input the following message via the phone:
In English: take photo
2.
Send the message to WT-1041 3G Camera
3.
If succeed, WT-1041 3G Camera will return MMS with the photo format 800x600,
or it will return message “Photo Taking Failed ”. If MMS sending fails, then it will
return a message “MMS Sending Failed”.
1.
Input the following message via the phone:
In English : take photo m
2.
Send the message to WT-1041 3G Camera
Note:
During Video recording, 3G Camera will send the alert message to host if low power
and will not give further warning if the Host doesn’t handle in time till 3G Camera lost
all the power. After 3G Camera retrieve the power, it will continue to perform the
Video Recording command and save the recorded data in two files. At the session, if
the host number is changed, the previous Video Recording command still valid until
the new host send the stop command.
Photo Taking
One-Time Photo Taking
One-Time Photo Taking In Night Mode (Low Light)
