-------------------------
-------------------------
Installation Sheet
Page PM.9.002886.EN.001
WSE 81 PLUS and WSE EVO
Date
08.02.2016
P/No:
500 852GB/Version B
SYSTEM DESCRIPTION
The IR light curtain series WSE 81 PLUS and WSE EVO consist of a transmitter detector (TX) and a receiver detector
(RX), they can be installed on the car door dynamically or statically on the doorsill. The detector system provides an IR
light curtain with a crisscross beam pattern in the area of the car entrance. If any beam is blocked, the output is
triggered and switches to reopen the doors again.
WITTUR Austria GmbH
Sowitschstrasse 1
A-3270 Scheibbs, Austria
Tel +43 (0) 7482/42542-0
Fax +43 (0) 7482/42542-232
http://www.wittur.com
E-mail:
Emphasis, translation and duplication in each form - also in excerpts - needs the written
Authorization of the WITTUR Austria Ltd.
We reserve the right to make alterations with respect to the specifications and figures in this manual.
INSTALLATION
The systems can be installed either on the moving
doors or statically in a position on the end of the
door sill.
(a)
Dynamic Installation
The system is mounted on the car doors using the
dynamic fixing kit provided.
1. Position each detector on the car door. Check the
detectors will be:
·
fitted approximately 5mm above the sill
·
aligned level and straight with each other
2. Screw the detectors to the door using the No
6x16 self-drilling screws provided.
3. Secure the cables with the P-clips and No
8x12mm self-tapping screws provided. Ensure
the cables are securely held, there are no tight
bends and they are no stressed or stretched as
the doors move.
(b) Static Installation
Please be aware of the maximum range of the
systems when you are using static installation.
