WittRock Integris 2002, Service Manual

Page: 101 / 452

4.17 Bed Locator Access Panel Cover
Chapter 4: Removal, Replacement, and Adjustment Procedures
2. Slightly loosen the outer two lower rail attaching screws (B).
3. Hold the access panel cover (C), and lower rail (D) in place with one hand
while removing the outer two lower rail attaching screws (B) with the other
hand.
4. Remove the lower rail (D) and the access panel cover (C).
Replacement
1. Place the access panel cover (C) and lower rail (D) in place on the bed
locator (E), and hold them in place with one hand.
2. Install the two outer lower rail attaching screws (B), and tighten them
enough to hold the access panel cover (C) and rail (D) in place.
3. Install the center two lower rail attaching screws (A), and tighten all of the
lower rail attaching screws.
4. Ensure the access panel cover (C) is back on securely.
4
Integris® 2002 Headwall System Service Manual (man142rb) Page 4 - 39