Wittke FEATHERWEIGHT, Maintenance Manual

Page: 26 / 171

16
Safety
Figure 2 - 3 Body latch assembly
4. Raise the body until both safety props can be moved into position.
The body can be raised by pushing the hoist joystick forward (see Figure 2
- 4) and holding it until
the body reaches the desired height.
I
MPORTANT
:
Do not raise the body higher than is required for the props.
Figure 2 - 4 Service hoist joystick
5.
Release one of the safety props by pulling its latch towards you (see Figure 2 - 5), and position the
prop adequately (see Figure 2 - 2).
The safety prop must take place around the cylinder rod.
Bolt
Spring
Locknut
Frame
rail