MRS/MMSE/ARS/TPM
Assembly
Revision: 11
5022-D002420
en-17
5.2
Attaching Motor to a machine
5.2.1 Attaching MRS / MMSE motor to a machine
5.2.2 Attaching TPM
+
motor to a machine
Observe the safety and processing instructions for the threadlocker to be
used.
Coat the fastening screws with a threadlocker
(e.g. Loctite
®
243).
Fasten the motor to the machine with the
fastening screws through the through-holes
(A).
Mount the motor in such a way that the
identification plate remains legible.
Only use washers for motors that have an
aluminum flange.
The prescribed screws and tightening
torques can be found in Chapter 10.1.1
"Specifications for mounting onto a machine
(MRS / MMSE)", Table "Tbl-15".
Observe the safety and processing instructions for the threadlocker to be
used.
Smear the fastening screws with a
threadlocker (e.g. Loctite
®
243).
Fasten the TPM
+
on the machine with the
fastening screws through the through-holes
(A).
Mount the TPM
+
in such a way that the type
plate (B) remains legible.
Do not use washers (e.g. plain washers,
tooth lock washers).
The prescribed screw sizes and tightening
torques can be found in Chapter 10.1.2
"Specifications for mounting onto a machine
(TPM+)", Table "Tbl-16".
A
B
