Safety
V.. / NV.. / CV..
en-6
2022-D059517
Revision: 05
A
damaged gearbox
can cause accidents and injury:
Immediately shut down a gearbox that has been overloaded due to misuse or a machine
crash (see Chapter 2.4 "Reasonably foreseeable misuse").
Replace the damaged gearbox, even if no external damage is visible.
2.6
Structure of warning instructions
2.6.1 Safety symbols
The following safety symbols are used to indicate possible hazards, prohibitions, and important
information:
Warning instructions are situation-specific. They
will be precisely where tasks are described in
which dangers can arise.
The warning instructions in this manual are
designed according to the following pattern:
A
= Safety symbol (see Chapter 2.6.1 "Safety
B
= Signal word (see Chapter 2.6.2 "Signal words")
C
= type and consequence of danger
D
= avoiding danger
General hazard
Hot surface
Suspended loads
Entanglement
Environmental
protection
Information
A
B
C
D
