Wittenstein Alpha LUC+125, Operating Manual, Page: 17 / 35

LUC
+
125, 24 V, time-controlled
Revision: 01 1000088471 en-15
Information in
display
Meaning See chapter
No display Power supply not connected 6.1
OFF Lubricator switched off 6.5
ON Lubricator ready for operation 6.5
PRO PRO menu 6.6
c1 ... 10 Adjustable setting of the number of cycles c
01 ... 35 Adjustable setting of the emptying time c
RUN RUN menu 6.7
01 … 50 During the manually triggered active run
command, the display shows the approximate
counterpressure in bar. In addition, the green
LED lights up.
FIL FIL menu 6.8
01...50 During the manually triggered active FIL
command, the display shows the approximate
counterpressure in bar. In addition, the green
LED lights up.
Clr If the process is canceled during the FIL
command, Clr is displayed .
INF INF menu 6.9
y01 Firmware version of the lubricator
r01 Firmware version of the lubricator
Pu0 Set control mode
t06 Currently set value of the emptying time t
c02 Currently set value of the number of cycles c
P50 Currently set maximum pressure P
U12 Currently set value of the cartridge size
E1 Currently set error output
L1 Currently set empty cartridge message
F0 Currently set feedback signal
E1 Error E1 (empty cartridge) 6.4
E2 Error E2 (cartridge error / no cartridge fitted) 6.4
E3 Error E3 (undervoltage) 6.4
E4/E5 Error E4/E5 (fatal error) 6.4
E7 Error E7 (overload) 6.4
01 … 50 After each cycle, the maximum applied counterpressure
during the cycle is displayed in bar.
Tbl - 9 Display messages