LK
+
/LPK
+
/LPBK
+
Startup and operation
Revision: 07
2022-D026817
en-15
5.5
Mounting the gearhead to a machine (LK
+
/LPK
+
only)
6
Startup and operation
Read the general safety instructions before beginning work (see Chapter 2.7 "General safety
instructions").
Observe the safety and processing instructions for the threadlocker to be
used.
Apply threadlocker (e.g., Loctite
®
243) to the
fastening screws.
Fasten the gearhead to the machine with the
fastening screws
only
through the threaded
bores (M).
Mount the gearhead in such a way that the
identification plate remains legible.
Do not use washers (e.g. plain washers,
tooth lock washers).
For appropriate screw sizes and tightening
torques, see Chapter 9.2 "Specifications for
mounting on a machine", Tables "Tbl-15"
and "Tbl-16".
Improper use can cause damage to the gearhead.
Make sure that
- the
ambient temperature
does not drop below –15
°
C or
40
°
C and
- the
operating temperature
does not 90
°
C.
Avoid icing, which can damage the seals.
For other conditions of use, consult our Customer Service department.
Only use the gearhead only up to its maximum limit values, see
Chapter 3.4 "Performance data".
Only use the gearhead only in a clean, dust-free and dry environment.
M
M
M
M