Wittenstein Alpha LK+, Operating Manual, Page: 10 / 22

Transport and storage LK
+
/LPK
+
/LPBK
+
en-8 2022-D026817 Revision: 07
3.6 Noise emission
Depending on the gearhead type and product size, the continuous sound pressure level is up to
78 dB(A).

For specifications on your particular product, refer to our catalogue or our Internet page at
http://www.wittenstein-alpha.de or contact our Customer Service department.

Observe the total noise pressure level of the machine.
4 Transport and storage
4.1 Scope of delivery

Check the completeness of the delivery against the delivery note.

Immediately notify the carrier, the insurance company, or WITTENSTEIN alpha GmbH in
writing of any missing parts or damage.
4.2 Packaging
The gearhead is delivered packed in foil and cardboard boxes.

Dispose of the packaging materials at recycling sites intended for that. Observe the locally
valid regulations for disposals.
4.3 Transport
No special transport mode is prescribed to transport the gearhead.
For specifications on the weights see Chapter 3.5 "Weight".
4.4 Storage
Store the gearhead in horizontal position and dry surroundings at a temperature of 0 °C to +40 °C
in the original packaging. Store the gearhead for a maximum of 2 years. Consult our Customer
Service department if the conditions are different.
For storage logistics, we recommend the "first in –first out" method.
Hard knocks, because of falling or hard dropping, can damage the
gearhead.

Use only hoisting equipment and transportation devices with sufficient
capacity.

The permitted lifting weight of a hoist may not be exceeded.

Lower the gearhead slowly.
Suspended loads may fall and cause serious injuries and even death.

Do not stand under suspended loads.
The plastic lid on the gearhead may come off.

Never transport the gearhead by the plastic lid.