Wittenborg ES 7100 PLUS Operator'S Manual Download Page 41

Page: 41 / 88

Deep cleaning

10.2011

ES 7100 PLUS

Hygiene kit

•

In order to save time when cleaning and
filling it is recommended to have a
hygiene kit consisting of:

- mixing hoods.

- instant ingredient mixer unit with whipper

wheels

- powder traps

- dispense head with hoses and coffee
outlet

- cup carrier

Opening the machine

•

Turn the door key clockwise in keyhole

(fig. 25)

and open the door.

The 230 V current is automatically
turned off, but the machine still car-
ries 24V current.

If power is turned on, be careful not
to touch moving parts and electri-
cal components!

Removing the coffee waste

containers

•

Remove and empty the coffee waste
containers (see

regular cleaning

)

Summary of Contents for ES 7100 PLUS

























































































Search results

Summary of Contents for ES 7100 PLUS

Reviews:

Related manuals for ES 7100 PLUS

Brands by name

Popular brands

Wittenborg ES 7100 PLUS, Operator'S Manual

Search results

Summary of Contents for ES 7100 PLUS

Reviews:

Related manuals for ES 7100 PLUS

Brands by name

Popular brands