THERMOSTAT REPLACEMENT (CON'T)
8. Install the replacement thermostat and temperature sensing bulb following the reverse of the above procedure.
9. Reinstall the cabinet top cover and screws.
10. Reconnect the cabinet to the power source and test.
INDICATOR LIGHT REPLACEMENT
1. DISCONNECT THE CABINET FROM ITS POWER SOURCE.
2. Remove the top cover by removing the retaining screws and lifting the cover off the cabinet to expose the
indicator light.
3. Notice the arrangement and connection of all electrical leads and refer to the wiring diagrams for reference.
4. Disconnect the wire leads connected to the indicator light
5. Depress the side mounted retaining clips on the indicator housing and remove the light from the front of the
control panel.
6. Install the replacement indicator light by pushing it into the control panel until the retaining clips snap into place.
7. Reconnect the electrical leads to the indicator light.
8. Reinstall the cabinet top cover and screws.
9 Reconnect the cabinet to the power source and test.
HEATING ELEMENT REPLACEMENT
1. DISCONNECT THE CABINET FROM ITS POWER SOURCE.
2. Open the door to the cabinet.
3. Remove the bottom mounted element cover. (Catering Series)
Remove the entire secondary heat drawer assembly. (Banquet Series)
4. Remove the retaining screws securing the element to the interior rear of the cabinet.
