background image

LIMITED WARRANTY 

Wittco warrants the Products that it manufactures to be free from defects in materials and workmanship, under normal use and 
service, for the periods indicated below from the date of purchase when installed and maintained in accordance with Wittco's written 
instructions. Buyer must establish the "Products" purchase date by returning Wittco's Warranty registration Card or by other means 
satisfactory to Wittco in its sole discretion. 

Wittco warrants its Products to be free from defects in materials and workmanship from the date of purchase (subject to the 
foregoing conditions) for the period(s) of time and on the conditions listed below: 

a)     Ninety (90) days Labor Warranty

 

b)     One (1) Year Parts Warranty

 

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY. EXPRESSED OR IMPLIED. 
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE OR PATENT OR OTHER INTELLECTUAL PROPERTY RIGHT INFRINGEMENT.

 Without limiting the generality of the 

foregoing, 

SUCH WARRANTIES DO NOT COVER:

 Coated incandescent light bulbs or heat lamps, all glass components. Product 

misuse, tampering, misapplication, application of improper voltage, or recalibration of thermostats or high limit switches. 

LIMITATION OF REMEDIES & DAMAGES

 

Wittco's liability and Buyer's exclusive remedy hereunder will be limited solely, at Wittco's option, to repair or replacement by a 
Wittco authorized service agency (other than where Buyer is located outside of the United States or Canada, in which case Wittco's 
liability and Buyer's exclusive remedy hereunder will be limited solely to replacement of part under warranty) with respect to any 
claim made within the applicable warranty period referred to above. Without limiting the generality of the foregoing, all portable 
Products, as defined by Wittco, shall be delivered by Buyer, at its sole expense, to the nearest Wittco authorized service agency for 
replacement or repair. Wittco reserves the right to accept or reject any such claim in whole or in part. Wittco will not accept the 
return of any Product without prior written approval from Wittco, and all such approved returns shall be made at Buyer's sole 
expense.

 WITTCO WILL NOT BE LIABLE. UNDER ANY CIRCUMSTANCES, FOR CONSEQUENTIAL OR INCIDENTAL 

DAMAGES, INCLUDING BUT NOT LIMITED TO LABOR COSTS OR LOST OF PRODUCTS AND LOSS OF PROFITS 
RESULTING FROM THE USE OF OR INABILITY TO USE THE PRODUCTS.

 

 

Summary of Contents for 1826-7-DBL-IS














Reviews: