8
Step 3
Step 3
3.1
Insert the left bar (14) and right bar (13) into the main frame (as shown on figure
A and B).
3.2
Use 1 x screw with interior hexagon M10*25 (5), 1 x locking washer Ø10 (8) and
1 x washer Ø10.5*Ø20*T2.0 (6) from the interior of the main frame to fasten the
left bar (14) and the right bar (13) so that they are locked tight.
(As shown on
Figure C and D).
3.3
As shown on Figures E and F: use 2 x screws with interior hexagon M10*25 (5),
2 * locking washers Ø10 (8), 2 x washers Ø10.5*Ø20*T2.0 (6) on top of the main
frame. Fasten the left (14) and right (13) bars tightly.
(14) Left bar
1 x
(13) Right bar
1 x
(5) Screw with interior hexagon M10*25
6 x
(8) Locking washer Ø10
6 x
(6) Washer Ø10.5*Ø20*T2.0
6 x
(26) Hex key L8
1 x
