17
TROUBLESHOOTING
The gas valve is not on.
Turn on the valve.
The gas cylinder is empty.
Replace the gas cylinder with a new one.
The ignition button doesn’t work.
Check the battery.
There is no spark on ignition.
Contact the service centre
The flame burns inside the burner (whispering sound).
Turn off the burner and let it cool down. Then try to ignite
once more.
The regulator is defective.
Contact the service centre
Injector is partially blocked.
Clean the injector with a toothbrush. Don’t drill out and don’t
use wire/steel wire to remove blockages. Contact the service
centre
Connections are loose.
Tighten loose connections (do not overtighten) and conduct a
pressure leak test using soapy water
(see the instructions ‘Leak test’ page 4.
The hose is damaged.
Replace the hose. (Contact service centre).
The gas valve is faulty.
Contact the service centre
Connections/joints are damaged.
Contact the service centre
The pizza stone does not rotate.
Make sure that the cable from the power adapter is
connected correctly and that the power is turned on.
Make sure that the batteries are inserted correctly into the
battery compartment.
Check that the batteries are fully charged and replace them
if necessary.
The pizza stone is damaged.
Contact the service centre
Button/contact
or cables are damaged.
Contact the service centre
The burner will not ignite:
The flame of the burner is irregular:
Gas leak between joints:
The pizza stone does not rotate:
EN
EN
