Witt 21660079, User Manual

Page: 61 / 72

~ 61 ~
Attention: in case of installation of the product with a minimum height we
recommend to fix the rods after the installation of the product to the ceiling.
Insert the support rod into the ceiling plate previously fixed and tighten it
through the screws.
Carry out the electric connection.
Lift the ceiling cover and fix it by tightening the side dowel (Fig.6).
WS21 (SILT2 1) Installation
Place the fixing plate (Fig.1) into the ceiling, in a position which coincides with
the centre of your cook-top, then drill the holes and fix the plate by using the
screws and screw anchors supplied with the appliance. The power cord needs
to pass through the plate hole, which is shown by the arrow in Fig.1.
Remove the appliance from its packaging and place it in a suitable area,
where it is not likely to be damaged.
Fix the articulated rod to the product by inserting and tightening the fixing
screw, as shown in Fig. 7.
Adjust the height of the appliance , making sure a minimum distance of at
least 65 cm is maintained between the lowest part of the hood and the cook-
top; height adjustment can be done by loosening the rod fixing screws ,
adjusting the appliance height and then by fastening them again.
Insert the fixing plate cover from the rod upper part, as per Fig. 4.
Hang the appliance to the fixing plate, and secure the plate by using the two
screws supplied with the appliance, as shown in Fig. 8.
Make the electric connection.
Lift the fixing plate cover and secure it with the screws supplied with the
appliance, as shown in Fig.6