background image

2.2  Risk of material damage

NOTICE!
Damage to the USB cable or to the electronics
Damage to the USB cable or to the electronics

can damage the device.
– Only allow Customer Service to perform

work on the device’s electronics (

Ä

 “Cus-

tomer Service” on page 3

).

– In the event of damage to the USB cable or

the plug, disconnect the USB plug and

arrange for a repair by Customer Service

(

Ä

 “Customer Service” on page 3

).

– Keep moisture away from live parts. It can

result in a short-circuit.

– Do not kink or jam USB cables, damage

them on sharp edges or bring them into con-

tact with heat sources.

– Check the USB cable and plug for damage

every time before using the device.

NOTICE!
Material damage due to opening the housing!
Opening the housing causes a risk of damaging

components inside the device or damaging the

housing itself.
– Never open the housing of your own accord.
– In the event of malfunctions or problems that

cannot be solved using the operation

manual, contact Customer Service (

Ä

 “Cus-

tomer Service” on page 3

).

NOTICE!
Material damage due to use of non-recharge-

able batteries!
If non-rechargeable batteries are used in the

ChronoMaster Air, it could be damaged or

destroyed.
– Only use rechargeable NiMh batteries in size

AAA.

Damage to the USB cable or to the

electronics

Material damage due to opening

the housing

Material damage due to use of

non-rechargeable batteries (Chro-

noMaster Air only)

 

  

 

24.03.2021

Precision measuring device ChronoMaster / ChronoMaster Air

17

Summary of Contents for ChronoMaster



















































Reviews: