Mini/Midi magnetic stirrer
18
www.witeg.de | Manual Mini/Midi magnetic stirrer MS-12D/-18D
www.witeg.de | Manual Mini/Midi magnetic stirrer MS-12D/-18D
Notice
1.
If the product turns on and off during stirring, the stirring capacity might be
exceeded. Reduce the capacity of the stirring solution or change the size of the
stirring bar to a smaller one.
2.
Due to the nature of the glass top plate, the beaker on the top plate may move
when stirring at high rpm under certain conditions. In that case, please use the
provided silicon pad.
3.
The use with a silicon pad might decrease the performance a bit.
4.
This product is designed for a stable stirring performance. Nevertheless, it can
happen that the stirring bar escapes off during the operating at certain rpms. This
is due to various variables such as the agitation capacity, the intensity of mag
-
netic force of stirring bar, the size of the beaker, the speed of rotation and is not
a problem of the product itself. If the stirring bar continuously deviates, please
change the above variables to operate.
5.
For this product we recommend stirring bars up to 5 cm.
Adaptor assembly
1. Insert the groove of the adaptor body into the projection of the adaptor plug.
2. Slide the adaptor plug down until it clicks into place.
4. Products management
4.1 Maintenance and management
1.
If you need replacements due to failures during use, use only genuine parts
provided by us.
2.
Failure due to usage beyond normal limits cannot be maintained.
3.
When cleaning the product, remove the adaptor, wipe it with a soft towel. Only
when the dirt cannot be erased this way, use a towel soaked in solvent with a
low freezing point.
4. Cleaning the product:
Maintain the clean state of the product by regular cle-
aning. The regular maintenance of the product extends the use period of the
product and minimizes contamination of specimens.
