Manual
HE OEM 2 | 40-XX | 60-XX
been approved by the manufacturer. The manufacturer shall
bear no liability for any consequences resulting from the use of
other parts.
2.9 Unpermitted operation
If the pump is disconnected from the power supply, wait at
least 1 minute before reactivating. Otherwise, the pump's
inrush current limit has no effect, which can lead to functional
errors or damage to any connected heating controller. The
pump's operational safety can only be ensured
if it is used as intended. Please observe section 4 of
these operating instructions here. Ensure compliance
with the limit values detailed in the technical data.
3
Transport and Storage
After receiving the product, inspect it immediately for damage caused in transport. Should you
detect any transport damage, assert a claim with the haulier.
Incorrect transport and storage can lead to personal injury or damage to the product.
• Protect the product against frost, moisture and damage during transport
and storage.
• Only carry the pump by the pump housing, and never by the connection cable
or terminal box.
• If the packaging weakens due to moisture, this can lead to the pump falling
out and causing severe injury
4
Intended use
These high efficiency pumps are designed to circulate hot water in central heating
systems and are also suitable for pumping low density liquids in industrial and
commercial applications. They are also suitable for solar installations.
8
