Manual
19
HE OEM 2 | 40-XX | 60-XX
12 Electrical connection
Connect the power cord to the pump as shown in the picture.
Caution mains voltage! Always observe the necessary safety measures,
VDE regulations and local regulations.
The cross-section of the cable must not be less than 0.75 mm
2
.
When using cables with fine wires, use end wires sleeves.
Caution Danger to life!
Incorrect installation and incorrect electrical connection can be life-threatening.
Electricity hazards must be ruled out.
• Installation and electrical connection may only be performed by qualified personnel
and in accordance with the applicable regulations (e.g. IEC, VDE, etc.)!
• The type of current and voltage must comply with the data on the rating plate.
• Comply with the regulations of the local power supply company!
• Comply with the accident prevention regulations!
• Never pull on the power cord
• Do not bend the cord
• Do not place any objects on the cord
• When the pump is used in systems with temperatures above 90°C, a
connection cable that is suitably resistant to high temperature must be used
• There is a risk of sharp and jaged edges during assembly.
• Never transport by holding the power cord.
• There is a risk of injury from dropping the pump.
Click
1
2
3
4
