Operating instrutions
WITA Delta Plus UE 35A-XX PWM | UE 55A-XX PWM
30
10 Installation
Install the device with the power supply disconnected and with the pump motor lying horizon-
tally (the arrow on the pump housing shows the direction of flow) (Fig. 1).
When performing insulation work, ensure that the pump motor and the electronics housing are
not covered in insulation. If the installation location changes, you must rotate the motor housing
as follows:
• Unscrew the socket screw
• Rotate the motor housing
• Re-insert the socket screw and tighten
Fig. 1
Summary of Contents for Delta Plus UE 35A-XX PWM Series
Page 34: ...Notizen Notes 34 ...
Page 35: ...Notizen Notes 35 ...
