MTP51-JP User Manual
3
S
AFETY INSTRUCTION
Read this safety instruction and the manual first
Follow all instructions and information.
Do not lose this manual.
Do not use this apparatus under the rain or near the water.
Do not install the apparatus near heaters or in hot environments, do not use outside the
operating temperature range.
Do not open the apparatus, only qualified service technician are enabled to operate on it. The
apparatus needs servicing when it is not properly working or is damaged by liquids, moisture or
other objects are fallen in the apparatus.
Use only accessories or replacement parts authorized or specified by the manufacturer.
Clean the apparatus only with dry cloths, do not use liquids.
Report the serial number and the purchasing date in front of the manual. It is needed to have
proper replacement parts or accessories from the manufacturer.
When replacement parts are needed, use only replacement parts authorized from the
manufacturer. Substitution with not authorized parts could result in electric shock, hazards or
fire.
Keep attention on all the labels with warnings or hazards on the apparatus.
L
ED INDICATIONS
Led indication with LED RGB (
red
,
green
,
blue
) in front led (
❷
):
-
Wireless transmission status:
Green
when RF transmission power is on (on power on the
device, this LED is
red
and become green when the RF transmission power is on).
-
Battery status:
green
steady, slowly blinking (< 25%), quickly blinking (<12%).
-
Modulation peek (if activated and the limiter is disabled):
red
.
-
Ptt status:
red
if active (push to talk “pushed”).
-
Limiter in action (if activated):
blue
.
B
ATTERIES
MTP51-JP is working with 1 AA alkaline or NiMH or Lithium batteries (select correct type on setup
controls). Battery status can be checked on internal OLED display or looking the LED status on front
❷
.
BATTERY SUBSTITUTION
Open transmitter cover and insert the battery following polarity indicated.
