WisyCom MSR916, User Manual, Page: 3 / 12

2
F
RONT
P
ANEL
C
ONTROL AND
F
UNCTIONS
❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽
❾ ❿ ⓫ ⓬ ⓭ ⓮
❶ REMOTE indication. The red Led lights is on when the remote control interface is active (optional, on
request).
❷
CHANNEL switch (with back-light).
❸
MONITOR output connector (standard ¼”, i.e. 6.3 mm, stereo jack, parallel wired).
❹ Multifunction display,
RF section. The following parameters are simultaneously displayed:

“ A ” antenna RF-signal (bar-graph)

“ A ” antenna selected (Led A is on)

“ B ” antenna RF-signal (bar-graph)

“ B ” antenna selected (Led B is on).
❺ Multifunction display,
AF section. The following parameters are displayed:

AF line output level (bar-graph)

Open squelch (Led AF ON is on).
❻ Multifunction display,
Batt. section ( TX % battery lifetime: 100%, 75%, 50%, 25%, 12% ).
❼
LINE OUT connector.
XLR3-M type:

pin 1 = ground;

pin 2 = AF-a;

pin 3 = AF-b
The line-output is transformer-balanced and floating.
❽
RXA and RXB antenna connectors (N-F type).
❾
ON on/off switch (with Led indication).
❿
SQUELCH threshold adjustment (between 0 ÷ 50

V).
⓫ Monitor
VOLUME .
⓬
CH GROUP : channel’s group switch [ #1 / #2 ] (when on, green Led indicates group #1 ).
⓭
T.SQL : tone-squelch function switch [ On / Off ] (when on, yellow Led indicates tone-squelch on).
⓮
P.TONE (Pilot Tone) indication. The yellow Led lights on when the matching pilot sub-carrier is
received.