29
Removing the Main Board
1.
See “Removing the Battery” on page 5
2.
See “Removing the Hard Disk Drive Module” on page 10
3.
See “Removing the Middle Cover” on page 11
4.
See “Removing the Keyboard” on page 12
5.
See “Removing the Optical Disk Drive Module” on page 13
6.
See “Removing the LCD Module” on page 17
7.
See “Removing the Upper Case” on page 25
8.
Disconnect the left speaker cable; remove the tape and disconnect the right speaker cable.
CAUTION: While reassembling, be careful not to route the right speaker cable on the chip beside.
9.
Remove the one screw.
10. Remove the main board carefully.
Step
Size (Quantity)
Color
Torque
1
M2.5 x L5 (1)
Silver
3 kgf-cm
