Wisnetworks WIS-Q2300, User Manual

Page: 2 / 26

WIS-Q2300 User Manual
Page 2 , Total 26
1. Application
Thank you for your purchase WIS-Q2300
。
This handbook is to help you know and configure WIS-Q2300.
2. Configuration Preparation
2.1 Installation Device
Figure 1

Press the clip of 2.4GHz CPE
，
pull out the cover
，
stick one end of cable into ETH port; Slide the
cover until the clip locked.

Stick the other end of cable into POE port of power adapter.

Take another cable, stick one end of cable into LAN port of adapter, the other end into computer port.

Power adapter is plugged into outlet to ensure power open.
2.2 Network Settings

Set PC and set IP address as 192.168.1.x
（
x is 1-254 except 2
，
to make sure no conflict with other IP of
network.
）

Run Web browser, input http://192.168.1.2
（
default IP address
）
and enter
。

Figure 2
，
Default username
：
admin
，
Password
：
admin
（
You can change this password after entering
the system
），
and then click Login to the system.