
WIS-Q2300 User Manual
Page 15 , Total 26
Figure 3-15
1.
Wireless Settings
SSID:
When CPE is set as Station Mode, enter here SSID of linked AP. If just enter SSID not AP MAC
address, CPE will choose the strongest signal among homonym SSID to link.
Lock to AP MAC:
used for locking MAC address needing to link AP. After SSID and AP MAC both enter,
CPE will link AP which meet two condition, not only same SSID.
Scan:
Scan button is used for scanning CPE SSID info under available channel
,
as Figure 3-16
。
Figure 3-16
MAC Address:
CPE scanned BSSID address of wireless service
;
SSID:
CPE scanned BSSID name of wireless service
;
Auth_mode:
CPE scanned authentication method of wireless service
;
Encryption:
CPE scanned encryption way of wireless service
;
Signal/Noise:
CPE scanned signal strength and noise intensity of wireless service
;
Frequency
:
CPE scanned working frequency of wireless service
;
Channel:
CPE scanned working channel of wireless service
;