30101271000_SW200-SW200A Rev 24022012E
6. Wartung
11
5.3 Switching off
1.
Switch the searchlight off with the lamp switch. If you are using an RCU (remote control unit),
this is switch S1 on the RCU.
2.
If you are using a pan/tilt unit, you can now also switch this off with switch S2 on the RCU.
This prevents control using the joystick.
6. Maintenance
6.1 Cleaning
Clean the front glass on the outside as needed. When doing so check the function of the
fixing clamps and inspect them for rust. Cleaning the inside of the searchlight is not
necessary. A coloured film develops on the mirror surface over time. This is harmless and
does not affect the light power.
Risk of glare!
Ensure that the searchlight cannot be switched on during cleaning work.
7. Replacement of defective parts
7.1 Before starting work
1.
Make sure that the complete electrical system is de-energised and that it cannot be switched
on again accidentally.
2.
Wait until the searchlight has cooled down.
3.
Read chapter 2.2
How to handle halogen lamps.
4.
Make sure that the halogen lamp does not get damaged during handling.
7.2 Assembly overview
The following illustrations should help you to better understand the design of the searchlight,
before starting with the replacement work. Follow the instructions on the following pages for
carrying out the replacement work!
3
1
2
1.
Casing
2.
Front frame and
front glass
3.
Quick release lock
Summary of Contents for SW 200
Page 1: ...OPERATING INSTRUCTIONS SEARCHLIGHT SW 200 SW200A ...
Page 15: ...15 ...
