- 20 -
The system menu of the basic unit
The menu item "System settings“ offers the parameter setup of the basic unit.
By selecting "System settings“ the user accesses the following OH 50 A system parameters:
Update OH50A
Insert USB memory stick > Select OH50A-File (Image)
MultiUpdate Mod
Insert USB memory stick > Modules will be successively updated with latest
software
UID License Code
UID for Remote
License: 8C061251 (example)
The Web-UI (optional feature) is locked by default.
The UID License Code is needed to purchase and obtain a license key.
This key is to be entered via Web-UI or USB memory stick.
LIC Load OH50A
Insert USB memory stick > Search for Unlock code and activate it
LIC Load Module
Insert USB memory stick > Search for License-File and transfer it to selected
module.
LIC to: 2 OH77 (example) > Insert USB memory stick
NIT Load Module
NIT Load (Import external NIT) NIT to: 2 OH77 (example) > Insert USB memory
stick
CfgLoad
Insert USB memory stick > config. file is uploaded, the modules are
configured accordingly
(the modules have to remain at the same plug-in positions as in CfgSave)
CfgSave
Insert USB memory stick > the configuration of all modules is described in the
config. file
StatSave
Insert USB memory stick > status (e.g. PLL-lock) of all modules is decribed in
the status file
IP-Addr
IP address setting, e.g. 192.168.000.100
ETH-NetMask
Subnet-Mask, e.g. 255.255.255.000
ETH-Gateway
Gateway address setting, e.g. 192.168.000.001
(router/server for internet)
Port
Standard-Port for http = 80
FM-Att
FM-Attenuation
0…30 dB (attenuation at the FM input)
Out-Att
Out-Attenuation
0…15 dB (attenuation at the FM output)
I-Supply
Current
I: <8750 mA (power consumption of installed modules)
SW-Version
Displays the current software version of OH 50 A
HW-Version
Displays the current hardware version of OH 50 A
BL-Version
Displays the current boot loader version of OH 50 A
Factory Reset
Reset OH 50 A to delivery status (all settings are deleted,
the activation key remains)
Restart OH50A
Software-Reset OH50A
Restart System
Reset OH50 Headend (all modules)
Restore Web SW
Restore the factory default settings of the web interface
With the
◄
key, you step back from the "System settings" menu to the module selection menu.
When the entry “system settings” is selected in the module selection menu and the
◄
button pushed
afterwards, the device will move to standby immediately.
Saving changes:
By leaving the "System settings" menu.
Without any user setting the standby display appears after 60 seconds,
settings are not being stored.
