WISEUPSHOP WIFI31, User Manual

Page: 1 / 104

WIFI31
User Guide
I. Product Overview
1. Blue Indicator Light
2. Red Indicator Light
3. Power Output
4. Power Input
5. Power Switch
II. What’s in the Box
-1× WIFI Power Bank Camera
-1× USB Cable
-1× AC110-240V to DC5V Power Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Get Camera Ready
3.1. Please make sure the Micro SD card has been formatted already and is securely fitted into
the camera’s SD card slot, or it will not work. We recommend you use a SDHC Class 10 Micro
SD card.
3.2. Power on the power bank camera by sliding the Power Switch to the ON position (next to
the Power Input). Wait about 1 minute, and you will see the blue indicator light remain solid
while the red one keep flashing, meaning the camera’s WIFI signal is ready.
3.3. Charge the camera by connecting it to an AC outlet using the included power adapter and
USB cable. It will take 4 hours to obtain a full charge.
3.4. If you want the camera to work 7/24 hours, keep it connected to an AC outlet using the
included power adapter and USB cable.
IV. Network Setup
4.1. Install the “ BVCAM ” APP on your Smartphone or Tablet PC.
For Android, iPhone and iPad users, please scan the QR code to download the “ BVCAM ” APP.
4.2. P2P Connection Setup (LAN Mode)
4.2.1. Go to the WIFI or WLAN Setting page on your phone or mobile device, connect to the
camera’s WIFI signal named “
CM*****
”. Wait for the WIFI to be connected and your phone
status bar will appear WIFI symbol as below:
[Note] :
If the camera’s WIFI signal cannot be found after a long time, please recharge the camera or
reset it (See VIII).
4.2.2. Run the “ BVCAM ” APP.
4.2.3. Add the camera to the “ BVCAM ” APP as below:
For Android: Tap +> Tap Add the new online Device> Search for the camera > Tap the camera
icon > Tap OK or √.
For IOS: Tap +> Tap Add new online Camera> Search for the camera > Tap the camera icon >
Tap OK.
4.2.4. If the camera shows “
Online ” on the “ Live video ” page, it means the camera’s P2P
(LAN) setup is successful. You can check or record video in the P2P (LAN) mode.
[Note]:
1). If the camera shows “ Offline ”, this is normal. Exit the APP and open it again. Wait a minute and the
camera will be “ online ”.
2). In this P2P (LAN) mode, you can only view video locally, within 15 meters (49 feet) open range.
4.2.5. On the live video screen, you can gently put your index finger and thumb on the screen
then slide in and outward directions on a specific area to zoom in and out.
4.3. Remote View Setup (WAN Mode)
>> Before remote view setup, please make sure that the camera is successfully added to the
APP and it's online in the P2P (LAN) mode.
4.3.1. Launch the “ BVCAM ” APP.
4.3.2. Set up remote view function as below:
Step 1: Tap the setting icon on the “
Live video ” page then choose " Advance Config " or
“ Device Settings ”.
Step 2: Go to “ WIFI Config ” page and select a desired WIFI hotspot to enroll the camera in.
Step 3: Tap “ OK ” to complete the remote view setup and the camera will reboot automatically.
How to check if remote view function works?
1. Exit the “ BVCAM ” APP.
2. Back to the WIFI or WLAN setting page on your phone or mobile device, exit your phone or
mobile device from the current WIFI network, enroll your phone or mobile device in another
WIFI hotspot, or you can turn off the WIFI or WLAN function, enable your mobile network data
instead.
3. Launch the “ BVCAM ” APP again. If the camera shows “ Online ” on the “ Live video ” page, it
means the remote view setup is successful and the camera has entered into WAN mode. Both
blue and red indicator lights will remain solid. You can go ahead to view live video or record
video remotely.
[Note]:
If the camera shows “ Device Offline ”, it means the remote view setup failed and you need to
reset the camera (See VIII) and set up all over again.
V. Motion Detection Recording Setup
>> Please make sure that the camera is added to the APP in LAN or WAN mode before you
start.
5.1. Launch the “ BVCAM ” APP.
5.2. Set up motion detection photograph as below:
Step1: Tap the setting icon on the “
Live video ” page then choose " Advance Config " or
“ Device Settings ”.
Step 2: Go to “ Alarm Config ” page, there, you can set a desired alarm sensitivity level, alarm
schedule, and alarm interval time. Enabling the “ Warning Tone ”, “ Push Notification ” and
“ On-screen Display ” is also available.
Step 3: Tap “ OK ” to complete the motion detection photograph setting.
Step 4: When motion is detected, the camera will push a warning message to your phone and
will take a screenshot of the live video page automatically. You can go back to the “
Live video ”
page and tap “ Alarm ” at the bottom of the screen to check out the photos.
5.3. Set up SD card video recording based on motion detection as below:
Step 1: Tap the setting icon on the “
Live video
” page then choose "
Advance Config
" or
“
Device Settings
”.
Step 2: Go to “
SDCard Record Config
” page and choose “
On alarm
”, then set resolution and
file length. Enabling “
Record sound
” and “
Loop recording
” is also available.
Step 3: Tap “ OK ” to complete the Motion Detection Video Recording setting.
Step 4: When motion is detected, the camera will push an alarm message to your phone or
mobile device and record a video to the Micro SD card automatically. You can go back to the
“
Live video ” page, tap “Record” at the bottom of the screen and then tap " Remote SD Card "
or to check out the video files.
[Note]:
Video Resolution: 1280×720P, 320x240 Video Format: ASF
VI. Recording Video to Smartphone or Tablet PC
>> Please make sure that the camera is added to the APP in LAN or WAN before you start.
6.1. Launch the “ BVCAM ” APP. Tap the camera icon to get into the live video screen.
6.2. Tap the video recording button and audio button to start or stop recording video.
For Android users, the video files will be saved on your mobile device's flash memory. For IOS
users, the video files will be only saved in the APP “
BVCAM ”.
6.3. Go back to the “ Live video ” page, tap “ Record ” at the bottom of the screen and then tap
" Local " or to check out the video files.
[Note]:
Video Resolution: 1080P, 720P, 640P, 480P Video Format: ASF
VII. Recording Video to Local Micro SD Card
>> Please make sure that the camera is added to the APP in LAN or WAN mode before you
start.
7.1. Launch the “ BVCAM ”APP.
7.2. Tap the setting icon on the “ Live video ” page then select " Advance Config " or “ Device
Settings ”.
7.3. Go to “ SD Card Record Config ” page, then set a desired recording mode and file length.
Enabling “ Record sound ” and “ Loop recording ” is also available.
7.4. Tap “ OK ” to complete the SD card recording setting and the camera will record video to the
Micro SD card continuously.
7.5. The video files will be saved in the Micro SD card of this camera. You can check out the
video files by following chapter 5.2.4.
[Note]:
When the camera shows “
online
” in LAN or WAN mode, every time you insert the Micro SD
card, the camera will record video to the SD card automatically.
VIII. Resetting
If for any reason the camera stops working or isn’t working properly, you can reset the camera
to restore it back to normal operation.
Operation : When the camera is powered on, use a pin to press and hold the Reset Button for
3 seconds until the both blue and red indicator lights turn off. The camera will reboot automati-
cally with default settings within 1 minute.
IX. Renaming Camera & Changing Password
>> Please confirm that the camera is added to the APP, and it is online in the P2P (LAN) mode
before you start.
9.1. Launch the APP “ BVCAM ”.
9.2. Change the camera name as below:
Step1: Tap the setting icon on the “
Live video ” page then choose “ Modify Device ” in the popup
window.
Step 2: Clear the default name and type in your desirable name like home, office, bedroom, etc.
Step 3: Tap “
OK ” or “ √ ” to confirm the change.
9.3. Change the password as below:
OPTION 1
Step 1: Tap the camera icon on the “ Live video ” page, and tap “ Change ” in the popup window.
Step 2: Enter the new password and confirm it, then tap “ OK ” to save the change.
OPTION 2
Step 1: Tap the settings icon on the “ Live video ” page, tap " Advance Config " or “ Device Set-
tings ”, then go to " Change P2P access password " or “ Change password ” page.
Step 2: Enter the default password “ 8888 ” at first, then enter a new password and confirm it,
tap “ OK ” to save the change.
Frequently Asked Questions
Q1: Why can’t I find the camera’s WIFI signal on my smartphone or tablet PC?
A1: There are 4 solutions to this problem:
1. Plug the camera into an outlet power supply using the USB cable provided. Wait 1 minute for
the WIFI signal SSID to appear.
2. Reset the camera (See VIII), then wait for the WIFI signal SSID to show up.
3. Keep your phone or mobile device within the camera’s WIFI hotspot range, refreshing the
WIFI signal page. It may take up to 2 minutes for the hotspot to become recognizable on your
phone or mobile device's WIFI setting page.
4. Shut off your phone or mobile device’s WIFI function for a while, then turn it on to search
again.
Q2: The camera does not record any video to the Micro SD card?
A2: Please power off the camera, take out the Micro SD card and format it, then insert it to the
SD card slot again, power on the camera again.
Q3: Why does the WAN mode setup fail?
A3: Please make sure your network is in a good condition. Plus, the WIFI network the camera
is configured with can’t be the same with one you connect your phone to.
Q4: What can I do if I forget the Login password?
A4: Please reset the camera. (See VIII)
Q5: The APP cannot find the camera’s UID after choosing “Search (LAN)”?
A5: Ensure your phone or mobile device is still connecting to the camera’s WIFI signal. Ensure
your camera is powered by the outlet power supply or the camera is fully charged. Note that we
don’t recommend you plug the camera into your PC computer for charging. Your camera will
not work properly that way.
Q6: Why live video screen shows up black and a searching circle spins in center but
nothing ever displays?
A6: a. If your camera is connected to a slow WIFI network, wait 10-30 seconds for live video to
re-appear.
b. On the live video page, please select a lower resolution.
Q7: Live video is not smooth and clear?
A7: Select suitable resolution according to the real time network environment
Q8: How many mobile devices can connect to the camera at the same time?
A8: No limit.
Q9: There is only 1 user, but the camera shows 2 or more users?
A9: a. If you log in very often, the last login record is still in. If you check it every 2-5 minutes,
the camera will show surely the exact numbers of users;
b. For your safety and privacy, please change camera's password for the fi¬rst time use.
Q10: How many cameras are supported on the mobile application?
A10: No limit.
Q11: Is there any PC client software I can use on my computer?
A11: Please click the PC client software download link and download the zip file on your PC:
http://www.wiseupshop.com/download?name=wifi31&+++++++
Q12: The camera is not holding my WIFI settings and continues to show that the camera
is offline?
A12: Make sure the camera is inside the range of good WIFI signal. Or check if the power
adapter is connected properly for long time use.
Q13: Will the camera still work if the power goes out?
A13: If the camera is in P2P (LAN) mode, the camera can still work and record video as long
as the camera is still charged. If the camera is in WAN mode, it will not work until the power is
restored and the Internet access is available.
Q14: How to add the camera to more devices?
A14: Make sure that camera is in WAN mode already. Then launch the “ BVCAM ” APP on your
other Android phones or tablet PCs, tap “ + ” icon, input the camera UID (a unique combination
of numbers and letters specific to your camera) or the QR code that sticks on the top of the
camera. Finally, tap “
OK
” to add the camera to the APP.
Q15: What can I do if my PC computer is unable to read the SD card directly from the
device?
A15: Remove the SD card from the camera, then use a card reader to read it on your PC. Make
sure the camera is powered off before removing the Micro SD card.
Q16: What media player software should I use to play back the video files on my comput-
er?
A16: Click the link: http://www.videolan.org/vlc/index.html to download and install VLC player to
play back video files on your PC or Mac computer.
6. Reset Button
7. Micro SD Card Slot
8. Camera Lens
9. IR LED