light will illuminate for 3 seconds and then the blue one will stay illuminated, indicating
the camera has entered into standby mode automatically.
3.3.2. Press Button C once to enter into motion detection recording mode. The blue
indicator light will flash once and turn off.
3.3.3. The camera will record video automatically when a movement is detected.
3.3.4. Press Button C once again to exit motion detection recording mode. The blue
indicator light will stay illuminated, indicating the camera is back to standby mode.
3.4. IR NIGHT VISION RECORDING
3.4.1. Power on the camera by holding down Button A for 3 seconds. The red indicator
light will illuminate for 3 seconds and then the blue one will stay illuminated, indicating
the camera has entered into standby mode automatically.
3.4.2. Press Button D once to enter into night vision mode. The infrared LEDs will be
turned on and the camera will start recording video automatically. The red indicator
light will flash three times and then turn off.
3.4.3. Press Button D once again to exit night vision mode. The infrared LEDs will be
turned off and the camera will stop recording video. The blue indicator light will stay
illuminated, indicating the camera is back to standby mode.
[Note]:
IR Distance: 1m
IV. Video/Image File Uploads
4.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the “DCIM” folder.
V. Setting Time/Date Stamp
5.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named “time.txt”.
5.5. Write the current date and time in the “time.txt” file with the correct format:
Year-Month-Day Hour:Minute:Second. (For example: 2016-04-12 14:24:32). Save this
