6
Configure and run layout
You can use the same layout set on the live screen for the Search Time function in order to perform a search using
the channel sequence and combination configured by the user.
M
`
For more information about the detailed setting method for each stage, refer to the user manual.
1
Live channel layout settings
d
e
f
c
b
g
a
a
Open the channel layout setup menu.
b
Click <
New
>.
c
Enter a name for the selected channels (e.g., PARKING).
d
Select the channels that you want to add to the layout (e.g., 1, 2, 3, 4).
e
Choose a split mode to apply (e.g., 4-way split).
f
Click <
OK
>.
g
Choose a layout to view it on the screen (e.g., change to PARKING).
2
Enter Search
a
a
In live mode, right-click to select <
Search
>.
Select <
Time Search
>.
3
Select a desired channel layout in the live screen
d
b
c
a
e
a
The initial search option is set to <
All Channels
>. Select a desired layout from among the channel group created
in the live screen.
b
Select a channel for each selected group.
c
Move the time bar to view the preview screen as shown in Figure
d
.
e
Press the <
Play
> button to enter the play screen.
4
Play
a
b
c
a
These are the various functions available for playback. Hover over them and a tool tip will be prompted.
Control the playback by referring to the tool tip.
(Ex : Skip Backward)
b
You can configure specific functions in
a
through playback settings.
Ex) Jump to play: 10 minutes, 30 minutes, 1 hour, 24 hours, etc.
c
Displays functions that are operating in split mode and during other playback.
Parking lot layout (live)
Full screen (live)
Parking lot layout (play)
When running the layout set on the live screen in the search menu, the layout is played in the following order.
Tip
