background image

English_3

  

SAFE

TY

 INFORM

ATION

Safety information

CAUTION

RISK OF ELECTRIC SHOCK. 

DO NOT OPEN

CAUTION

:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO 

QUALIFIED SERVICE PERSONNEL.

This symbol indicates that dangerous voltage consisting a risk of electric 
shock is present within this unit.

This exclamation point symbol is intended to alert the user to the presence 
of important operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

WARNING

•  To prevent damage which may result in fire or electric shock hazard, do not expose this appliance 

to rain or moisture.

•  To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with 

the installation instructions.

WARNING

1.  Be sure to use only the standard adapter that is specified in the specification sheet. 

Using any other adapter could cause fire, electrical shock, or damage to the product.

2.  Incorrectly connecting the power supply or replacing battery may cause explosion, fire, 

electric shock, or damage to the product.

3.  Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause 

abnormal heat generation or fire.

4.  Securely plug the power cord into the power receptacle. insecure connection may cause fire.

5.  When installing the camera, fasten it securely and firmly. The fall of camera may cause 

personal injury.

Summary of Contents for HCF-8010V





























Reviews: