Wise SCD-6013, User Manual

Page: 26 / 35

26_ camera operation
camera operation
-
FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
-
LANGUAGE : You can select the menu language according to your requirements.
-
RETURN : Return to the SPECIAL menu.
y Comm aDJ (Communication adjustment) :
-
COAX : You can select whether to
use COAX communication.
-
RETURN : Return to the SPECIAL
menu.
y
imagE aDJ
1
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
2
Select a desired mode using the
Function Setup switch.
-
GAMMA :
The setting range is 0.35~1.0 .
The closer to 1.0 the setting is, the
darker it gets. default value is User,
User is the optimum setting.
-
PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the higher
the PED level gets.
-
COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
-
H-REV : Flip an image horizontally.
-
V-REV : Flip an image vertically.
-
SHARPNESS : Select a mode to adjust the thickness of an image’s sharpness.
Depending on the image, adjust it to an appropriate value.
y
OFF : Released state
y
ON : The setting range is 1 ~ 32.
-
RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not flip.
`
If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
COMM SETUP
▶
1. COAX ON
2.
RETURN
IMAGE SETUP
▶
1. GAMMA USER
2.
PED LEVEL
I
IIIIIIIIIIIIIIIIIIII
1
3.
COLOR GAIN
IIIIIIIIII
I
IIIIIIIIII
50
4. H-REV OFF
5. V-REV OFF
6. SHARPNESS ON
7.
RETURN