SAGE SERIES C225i
WISDOMAUDIO.COM
9
Proper Planar Placement
For the C225i the planar magnetic (HF) drivers should always be placed in the
middle of the two woofer (LF) drivers.
Making the C225i Connections
As with any system, you should make changes to the connections only when the
power is turned off to avoid any chance of inadvertently causing a problem (such
as a short-circuit).
Note:
The Wisdom Audio C225i is a quint-amplified speaker that requires
five
sets
of speaker wire to each of the locations rather than the usual two. One pair of
connections is for the planar magnetic module, whereas the woofer modules uses
four sets of connections, one each for six of the 24 woofers.
We recommend using heavy-gauge speaker wire, the gauge will vary dependent on
your speaker run length. Please consult an authorized dealer to determine what
gauge would be best for your application.
Connect the outputs of your Wisdom Audio SA-series amplifier to the appropriate
woofer sections, taking care to get both the channel assignments and the polarity
correct. Connect the positive (+) terminals on the SA Series amplifier to the positive
(+) terminals for the woofer on the loudspeaker; likewise, connect the negative (–)
terminals on the amplifier and the speaker, respectively.
Next connect the outputs of your chosen amplifier for the midrange/treble to the
Sage C225i planar sections in a similar fashion, taking care with all five channel
assignments and polarity.
