background image

 

SAGE SERIES C225i 

 

WISDOMAUDIO.COM 

11 

During the warranty period, any Wisdom Audio products exhibiting defects in 
materials and/or workmanship will be repaired or replaced, at our option, without 
charge for either parts or labor, at our factory. The warranty will not apply to any 
Wisdom Audio products that has been misused, abused, altered, or installed and 
calibrated by anyone other than an authorized Wisdom Audio dealer.  

Any Wisdom Audio product not performing satisfactorily may be returned to the 
factory for evaluation. Return authorization must first be obtained by either calling 
or writing the factory prior to shipping the component. The factory will pay for 
return shipping charges only if the component is found to be defective as 
mentioned above. There are other stipulations that may apply to shipping charges.  

There is no other express warranty on Wisdom Audio products. Neither this 
warranty nor any other warranty, express or implied, including any implied 
warranties of merchantability or fitness, shall extend beyond the warranty period. 
No responsibility is assumed for any incidental or consequential damages. Some 
states do not allow limitations on how long an implied warranty lasts and other 
states do not allow the exclusion or limitation of incidental or consequential 
damages, so the above limitation or exclusion may not apply to you.  

This warranty gives you specific legal rights, and you may also have other rights, 
which vary from state to state. This warranty is applicable in the United States and 
Canada only. Outside of the U.S. and Canada, please contact your local, 
authorized Wisdom Audio distributor for warranty and service information.  

 

 

 

 

 

 

Summary of Contents for Sage C225i















Reviews: