INTRODUCTION
We congratulate you on your recent purchase of the Wisco 925 Food Warmer and Display unit.
Our company has tremendous pride in presenting you with a dependable, top quality unit
that is designed to provide you with years of reliable service.
As a safety precaution we recommend all instructions and safety tips appearing in this manual
be reviewed prior to operation.
Wisco’s Display Warmer is constructed of 22 guage brushed stainless steel. The unit is equipped
with tempered glass sides, door panels, and either a rotating carousel or adjustable shelving.
Both the rotating carousel and adjustable shelves are chrome plated and are easily removable
for quick cleaning.
CONSTRUCTION
!
!
!
IMPORTANT:
Read the following safety and operation instructions to avoid injury and to avoid
damage to equipment or property.
Plug unit into a properly grounded electrical outlet of the correct voltage, size and plug configuration for this unit. We recommend usage
on an individual branch circuit of at least 15 amps for best results. Failure to do so may result in decreased performance of the warmer.
Unit is not waterproof. Do Not submerge in water. Do not operate if unit has been submerged in water.
!
!
Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.
Exterior surfaces on unit may get hot. Use caution when touching these areas to avoid injury.
Only shatter resistant light bulbs which meet or exceed NSF Standards specifically designed for food holding units must be used.
Breakage of bulbs not specially coated could result in personal injury and/or food contamination.
This warmer is designed to maintain food product at or above the optimum temperature.
It is not designed or intended to heat up or cook food to the serving temperature. Product is
to be prepared to a temperature of above 160 F before placing in the warmer.