HINGE FITTING INSTRUCTIONS
270913
B_06/2021
Stainless steel soft close hinges
www.
wirquin
.co.za
WIRQUIN Manufacturing | 1 Hospital Road - Somerset East | Eastern Cape - 5850
T: +27 42 243 6000 | Email: [email protected]
CARE AND CLEANING INSTRUCTIONS
•
The seat and cover should be cleaned using warm soapy water.
•
Do NOT use aggressive or abrasive cleaners as this may scratch the surface.
•
The hinges should be cleaned using soap or mild detergent.
•
After cleaning, the hinges should be rinsed in clean water and dried.
•
NEVER use bleach, concentrated cleaners or acids as this will cause discolouring
and pitting.
•
Do not leave bleach in the toilet bowl with the cover closed because it may
cause discolouration of the seat and hinges.
•
The cover of the toilet seat is for decorative purposes only. The lid is not
guaranteed to carry weight.
(Do NOT stand or sit on the cover.)
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
•
Place seat onto fixation to align before placing covers over.
•
Align seat in position and remove seat to tighten fixation with a
screwdriver.
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
•
Once fixation is tight, place covers over.
•
Place seat onto fixation.
•
Tighten fastener with alan key supplied.
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
FAST
SLOW
SLOW
SLOW
SLOW
A
B
x1
x1
•
Adjust speed of seat and lid independantly as shown below.
B : INSTALLATION OF SOFT CLOSE CARTRIDGES
C : ADJUSTING THE SPEED OF SOFT CLOSE
7
8
9
10
11
SCAN THE QR TO VIEW THE HINGE
ON OUR WEBSITE WITH DETAILED
VIDEO’S ON SETTING THE HINGES
