5. Place the lower edge of the iPad in the two clips at the base of the iPad bracket.
6. Tilt the iPad against the top retaining clips. Pull the clips over the top edge of the
iPad and ensure they are secure.
7. If additional support is required, sliding the headrest down against the mounting
bracket can provide improved stability.
POWER CONNECTION INSTRUCTIONS
The IPAD2THRM includes a Dual USB Charging Adapter and USB to Apple Dock
Connector cable to allow the iPad to be charged when in use.
1. Insert the USB charging adapter into an empty cigarette lighter socket.
2. Plug the 6’/1.8M USB to Apple Charging Adapter cable into one of the USB ports
on the charging adapter.
3. Connect the 30-Pin Dock Connector to the iPad.
4. Locate the USB charging cable such that it does not interfere with the safe
operation of the vehicle and will not be damaged by sliding seat mechanisms, etc.
If you have a vehicle equipped with a USB port, and it has the capability of providing
the 2.1 Amps of current required to charge your iPad, you may use this connection in
place of the Dual USB Charginng Adapter.
AUDIO CONNECTION INSTRUCTIONS
The IPAD2THRM includes a 6’/1.8M Auxiliairy input audio cable. This cable can
connect your iPad to the Auxiliary input on a factory or aftermarket radio.
1. Turn the volume all the way down on your iPad, then connect one end of the Audio
cable to the Auxiliary input jack on radio.
2. Connect the other end of the cable to the headphone jack of the iPad.
3. Select the Auxiliary input as the source on your radio and adjust the volume level of
the iPad until the output of the radio matches that of another sources.
