
TX Rate
Normally choice transmission rate as “Best”, system will adapt best rate for real environment.
Including 64QAM 3/4, 64QAM 2/3, 16QAM 3/4, 16QAM 1/2, QPSK 3/4, QPSK 1/2, BPSK 3/4, BPSK 1/2
TX Power
Transmission power, 1/2 of transmission power equals to 3dB. Including Full / Half / Quarter / Eighth /
Min
Half: -3 dB
Quarter: -6 dB
Eighth: -9 dB
Min: -12 dB
WLAN Status
In this page, it can show remote bridge RSSI for local bridge and local bridge RSSI for remote bridge.
We can decide the best direction of antenna from following steps:
1. We check the RSSI only in one side. (We call it local side.)
2. Fix remote side antenna, and adjust local side antenna. In local side, check the “RSSI” first, to find a
best RSSI and then fix the local antenna.
3. Adjust the Remote antenna, to find the Best Remote RSSI, and then fix the remote antenna.
4. If “RSSI” is changed, and worse than before, adjust local antenna again to get a best one and fix
local antenna.
5. If “Remote RSSI” is changed and worse, adjust remote antenna again.
6. Follow the same ways to get a better RSSI and Remote RSSI value. And Fix both side antennas.
Figure 10
Status