© 2018 Wireless Prime INC. All Rights Reserved.
Structure & Interface
V-Mount
RX: 3060
05
06
Antenna Interface
Tally(DB9)
RJ-45
RS232/422
SDI Out
DC-IN
HDMI Out
Antenna Interface
OLED Display
LNA ON/OFF
CH/WPS
Reset
Power Button
Receiver Key Operation
Function
Operation
Description
Frequency
channel
switching
Short press
the “CH/WPS”
button about 1S
After the receiver switches the frequency
, the OLED display of the
receiver and transmitter will display the new
frequency
number after
switching.
channel about 1S
channel about 1S
High-gain and
low-gain mode
switching
Press the “LNA
ON/OFF” button
for about 3s
“L” (low-gain) mode:
Applicable for close-range
and strong interference
environments, with strong anti-interference
ability. After switching to L mode,
the “L” character will be displayed on the
OLED display.
(LOS &TX-to-RX
<200m/656ft )
“
(NLOS or
TX-to-RX>200m/656ft)
H” (high-gain) mode:
Applicable for long distances,
and the anti-
interference ability is weaker than that in “L”
mode. After switching to H mode, the
characters on the OLED display will disappear.
Code matching
Press the “CH/
WPS” button for
about 3s
In the code matching process of the
transmitter and receiver, the word “WPS”
will always be displayed on the OLED
display, and the string will disappear after
the code matched. The transmitter and
receiver need to be in code matching
status at the same time to achieve
code matching.
OLED display
switching
between
landscape
mode and
portrait mode
Short press the
“LNA ON/OFF”
button for
about 1s
Short press the “LNA ON/OFF” button,
and the display will switch between
landscape mode and portrait mode.
Restart a
certain
channel video
of the receiver
First, short press
the [RESET] button
for cyclical selection
among 1, 2, 3 and 4 to
restart the decoding
board in the channel.
Then press and hold
the [RESET] button
for 3s to confirm
the restart.
After long pressing the button to confirm,
the “RESET” string will be displayed on
the OLED display for 3s, and the string
will disappear after the decoding board
begins to restart.
V-mount Plate
V-Mount
RX: 3060
05
06
Antenna Interface
Tally(DB9)
RJ-45
RS232/422
SDI Out
DC-IN
HDMI Out
Antenna Interface
OLED Display
LNA ON/OFF
CH/WPS
Reset
Power Button
Receiver Key Operation
Function
Operation
Description
Frequency
channel
switching
Short press
the “CH/WPS”
button about 1S
After the receiver switches the frequency
, the OLED display of the
receiver and transmitter will display the new
frequency
number after
switching.
channel about 1S
channel about 1S
High-gain and
low-gain mode
switching
Press the “LNA
ON/OFF” button
for about 3s
“L” (low-gain) mode:
Applicable for close-range
and strong interference
environments, with strong anti-interference
ability. After switching to L mode,
the “L” character will be displayed on the
OLED display.
(LOS &TX-to-RX
<200m/656ft )
“
(NLOS or
TX-to-RX>200m/656ft)
H” (high-gain) mode:
Applicable for long distances,
and the anti-
interference ability is weaker than that in “L”
mode. After switching to H mode, the
characters on the OLED display will disappear.
Code matching
Press the “CH/
WPS” button for
about 3s
In the code matching process of the
transmitter and receiver, the word “WPS”
will always be displayed on the OLED
display, and the string will disappear after
the code matched. The transmitter and
receiver need to be in code matching
status at the same time to achieve
code matching.
OLED display
switching
between
landscape
mode and
portrait mode
Short press the
“LNA ON/OFF”
button for
about 1s
Short press the “LNA ON/OFF” button,
and the display will switch between
landscape mode and portrait mode.
Restart a
certain
channel video
of the receiver
First, short press
the [RESET] button
for cyclical selection
among 1, 2, 3 and 4 to
restart the decoding
board in the channel.
Then press and hold
the [RESET] button
for 3s to confirm
the restart.
After long pressing the button to confirm,
the “RESET” string will be displayed on
the OLED display for 3s, and the string
will disappear after the decoding board
begins to restart.
V-mount Plate
01
02
About the User Manual
This Manual details the product specifications, instructions for use,
precautions, and troubleshooting. Read the Manual carefully before using
the product. If you have any questions or difficulties in using this product,
contact the company or the seller in time.
Product Features
BeamLink Quad is a set of 4TX-to-1RX full-HD audio and video wireless
transmission system. The 4 video channel transmission shares one wireless
channel and supports the highest video resolution up to 1080P/60Hz.
This system is based on 5G wireless network technology for transmission,
along with advanced 4×4 MIMO and Beam-Forming technology. Image
processing is performed using H.264 coding-decoding technology,
and the video quality is sharp and the latency is lower.
Brief Introduction
This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD
input and output, with the highest resolution of 1080P/60Hz. With the use of H.264
coding-decoding technology with high compression ratio and high definition,
the images have high definition, and the latency is as low as 70ms.
4 transmitters and 1 receiver share one wireless channel
Beam-Forming
Combined with 4×4 MIMO and Beam-Forming technology, this product has
advantages over other WiFi products in the market in terms of transmission
distance and image bitrate. Beam-Forming technology makes wireless signals
more concentrated and stronger in the direction from which they are transmitted
to the receiver, allowing them to transmit farther and be less susceptible to
interference from other signals, thus making them more stable.
Packing List
The following items are included in the product package
Notice: The transmitter comes with the Sony NP-F type battery dock and has
preassembled V-mount connector. The receiver has preassembled V-mount battery
plate and V-mount connector.
This product supports 4 channel videos simultaneous input, with resolution
up to 1080P60 per channel. 4 channel videos shares one wireless channel,
which greatly saves spectrum resources and provides great convenience for
users to perform multi-camera shooting.
High-quality and ultra low latency
This product supports switching between two operating modes, namely standard
mode and RTSP streaming mode. In standard mode, this product supports
4TX-to-1RX and 4TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.
In RTSP streaming mode, this product supports 4TX-to-1RX and 4TX-to-2RX,
and the video streaming interface is LAN port(RJ45) ..
Support
RS232/422
This
product
supports
signal
transmission
via
RS232
/
422 interface
,
which
is
convenient
for
users
to
control
the
transmitting
terminal
through
the
device
at
the
receiving
terminal
,
such
as
the
PTZ
.
controlling
Support monitoring on mobile devices
This product supports monitoring on portable devices, like mobile phone,
tablet and PC. User can install live streaming tool supporting RTSP like VLC
on mobile device, and connect portable devices with receiver via WiFi to watch
the live video with different transmitter IP address.
Standard mode and streaming mode
Power supply cable
*4 pieces
Transmitter *4 pieces
Antenna
* 16 pieces
Receiver *1 piece Antenna *4 pieces
Power adapter *1 piece Metal Stand *1 piece
Double screw the
connector*4 pieces
Rs232 cable
*4 pieces
RS232 cable
*1 pieces
5
01
02
About the User Manual
This Manual details the product specifications, instructions for use,
precautions, and troubleshooting. Read the Manual carefully before using
the product. If you have any questions or difficulties in using this product,
contact the company or the seller in time.
Product Features
BeamLink Duo is a set of 2TX-to-1RX full-HD audio and video wireless
transmission system. The 2 video channel transmission shares one wireless
channel and supports the highest video resolution up to 1080P/60Hz.
This system is based on 5G wireless network technology for transmission,
along with advanced 4×4 MIMO and Beam-Forming technology. Image
processing is performed using H.264 coding-decoding technology,
and the video quality is sharp and the latency is lower.
Brief Introduction
This product supports HD-SDI&3G-SDI input and output as well as HDMI full-HD
input and output, with the highest resolution of 1080P/60Hz. With the use of H.264
coding-decoding technology with high compression ratio and high definition,
the images have high definition, and the latency is as low as 70ms.
2 transmitters and 1 receiver share one wireless channel
Beam-Forming
Combined with 4×4 MIMO and Beam-Forming technology, this product has
advantages over other WiFi products in the market in terms of transmission
distance and image bitrate. Beam-Forming technology makes wireless signals
more concentrated and stronger in the direction from which they are transmitted
to the receiver, allowing them to transmit farther and be less susceptible to
interference from other signals, thus making them more stable.
Packing List
The following items are included in the product package
Power supply cable
*2 pieces
Transmitter *2 pieces
Antenna
* 8 pieces
Receiver *1 piece Antenna *4 pieces
Power adapter *1 piece
Metal Stand *1 piece
Notice: The transmitter comes with the Sony NP-F type battery dock and has
preassembled V-mount connector. The receiver has preassembled V-mount battery
plate and V-mount connector.
This product supports 2 channel videos simultaneous input, with resolution
up to 1080P60 per channel. 2 channel videos shares one wireless channel,
which greatly saves spectrum resources and provides great convenience for
users to perform multi-camera shooting.
High-quality and ultra low latency
This product supports switching between two operating modes, namely standard
mode and RTSP streaming mode. In standard mode, this product supports
2TX-to-1RX and 2TX-to-2RX, and the video outputs interface are HDMI and 3G-SDI.
In RTSP streaming mode, this product supports 2TX-to-1RX and 2TX-to-2RX,
and the video streaming interface is LAN port(RJ45) ..
Support
RS232/422
This
product
supports
signal
transmission
via
RS232
/
422 interface
,
which
is
convenient
for
users
to
control
the
transmitting
terminal
through
the
device
at
the
receiving
terminal
,
such
as
the
PTZ
.
controlling
Support monitoring on mobile devices
This product supports monitoring on portable devices, like mobile phone,
tablet and PC. User can install live streaming tool supporting RTSP like VLC
on mobile device, and connect portable devices with receiver via WiFi to watch
the live video with different transmitter IP address.
Standard mode and streaming mode
Double screw the
connector*2 pieces
RS232 cable
*2 pieces
RS232 cable
*1 pieces
05
06
Receiver Key Operation
Function
Operation
Description
Frequency
channel
switching
Short press
the “CH/WPS”
button about 1S
After the receiver switches the frequency
, the OLED display of the
receiver and transmitter will display the new
frequency
number after
switching.
channel about 1S
channel about 1S
High-gain and
low-gain mode
switching
Press the “LNA
ON/OFF” button
for about 3s
“L” (low-gain) mode:
Applicable for close-range
and strong interference
environments, with strong anti-interference
ability. After switching to L mode,
the “L” character will be displayed on the
OLED display.
(LOS &TX-to-RX
<200m/656ft )
“
(NLOS or
TX-to-RX>200m/656ft)
H” (high-gain) mode:
Applicable for long distances,
and the anti-
interference ability is weaker than that in “L”
mode. After switching to H mode, the
characters on the OLED display will disappear.
Code matching
Press the “CH/
WPS” button for
about 3s
In the code matching process of the
transmitter and receiver, the word “WPS”
will always be displayed on the OLED
display, and the string will disappear after
the code matched. The transmitter and
receiver need to be in code matching
status at the same time to achieve
code matching.
OLED display
switching
between
landscape
mode and
portrait mode
Short press the
“LNA ON/OFF”
button for
about 1s
Short press the “LNA ON/OFF” button,
and the display will switch between
landscape mode and portrait mode.
Restart a
certain
channel video
of the receiver
First, short press
the [RESET] button
for cyclical selection
among 1, 2, 3 and 4 to
restart the decoding
board in the channel.
Then press and hold
the [RESET] button
for 3s to confirm
the restart.
After long pressing the button to confirm,
the “RESET” string will be displayed on
the OLED display for 3s, and the string
will disappear after the decoding board
begins to restart.
V-Mount
RX: 3062
Antenna Interface
RJ-45
SDI Out
DC-IN
HDMI Out
OLED Display
LNA ON/OFF
CH/WPS
Reset
Power Switch
RS232/422
Tally in
Antenna Interface
V-mount Plate
