© 2018 Wireless Prime INC. All Rights Reserved.
Trouble shooting
26
Solutions
Trouble
If mosaics or jams
appear during use
Lift the transmitter and receiver as high as possible,
to 1.5-2m or more;
The antennas are installed in fan-shape and facing
forward to receiver, and the transmission effect
is the best;
The LNA mode is set in H (high-gain mode);
When multiple transmitters function at the same time,
ensure that the transmitters are at least 1m apart
from each other;
If there is still a mosaic or a jam, switch the product
frequency to the intermediate frequency.
If smear or frame loss
appears during use:
If the latency configuration has been changed,
confirm the software version of the
and contact the technician in time.
If the software version is confirmed to be too old,
it is necessary to upgrade the software.
encoder and
decoder
If there is no
connection
during use,
It is divided
into 2 cases:
In close range
(
, if the transmitter
and receiver are connected to 4 antennas, the distance
needs to be extended to 5m, and the LNA mode should
be set to L (low-gain mode); when multiple transmitters
function at the same time, ensure that the transmitters
are at least 1m apart from each other;
situation TX-to-RX<2m)
In the long-distance situation
, lift the
transmitter and receiver as high as possible, to 1.5-2m
or more; the antenna is fan-shaped and facing forward,
and the transmission effect is the best; the LNA mode
is set to H (high-gain mode); when multiple transmitters
function at the same time, ensure that the transmitters
are at least 1m apart from each other.
(TX-to-RX<2m)
Trouble Shooting
