Page
4
of
7
4. Main Programming Screen Functions:
A.
1-6 Capcode,7digits POCSAG address
range from 0000008 to 2097151
B.
1-6 Capcode, ON or OFF. (Enable or disable).
C.
PC Com Port number set-up.
D.
PC Com Port Communication data rate set-up.
E.
RX Data Polarity, Signal polarity selection (normal or Invert polarity).
F.
Transmitter Function On/Off select.
G.
If [F] Transmitter set ON, then set up the Transmitter RF power here.
H.
Data forward select, for data repeater use.
J.
for Receiver Frequency set-up. (Full 8 digits are required).
K.
Display System synthesized truly frequency for reference.
L.
Receiver data rate speed (512, 1200 or 2400 bps)
M.
The system oscillator select, normally set [TCXO]
N.
Transmitter Frequency set-up. (Full 8 digits are required).
P.
Display System synthesized truly frequency for reference.
