4. SBS Functions
4.4 Access
Control
The SBS can be configured to only permit access to the User
Interface when a password is correctly entered. This will lock out any
attempted access to the User Interface from unauthorised users and
will prevent them connecting, disconnecting or changing any of the
settings. It will still allow access to the internet from any computer
connected (directly or indirectly) to the SBS if the Wired Ocean
service is connected.
To enable Access control:
1. Select “SETTINGS”, “GENERAL”.
2. Click on the heading “Users”.
3. Tick the box labelled “Enable access control”.
4. You will now be presented with a box requesting you to enter
the Administrator password.
5. Enter your preferred choice of password and click the Apply
button.
6. Record the password somewhere securely so that you and
other authorised users can gain access with it in the future.
You can change the password at any time using the same method as
above and it will happen with immediate effect. If the password has
been irrecoverably forgotten you will need to contact your installer or
Wired Ocean.
Page 15