SERVICE MANUAL & I.C.A. FOR THE 7000 AMPHIBIOUS FLOATS
Revision G Page 76 of 102 P/N 1004646 Doc. No. W7001-24-01
9.0 SERVICING INSTRUCTIONS
As coded in the Inspection Time Limits chart in this section, there are items to be checked
each 25, 50, 100, and 200 hours. Also, there are notes on special items which may require
servicing at more frequent intervals.
*
When conducting an inspection at 25 hours, all items marked for 25 hours
would be accomplished.
*
at 50 hours, the 25 and 50-hour items would be accomplished.
*
at 100 hours, the 25, 50, and 100-hour items would be accomplished.
*
at 200 hours, the 25, 50, 100 and 200-hour items would be accomplished.
*
A complete inspection (Annual Inspection) would include all 25, 50, 100, 200 hour items.
Below is a list of recommended lubricants and “protection” products when servicing float hull,
amphibious components. This lists products used by Wipaire during assembly of the floats.
There may be equivalent products just as satisfactory for protection. However, it is
recommended if trying different products, to inspect them frequently so as to determine their
effectiveness.
Protection of nuts, bolts, hydraulic lines, metal surfaces, or electrical connections.
Dinitrol AV30
Dinol Group
CRC – SP400 Soft Seal
CRC Industries
General Lubricants
LPS 1, LPS 2 and LPS 3
LPS Industries
