SERVICE MANUAL & ICA
10000 AMPHIBIAN FLOATS ON AIR TRACTOR AT-802A
Page 98
Revision U
P/N 1002545
As coded in the Inspection Time Intervals chart in this section, there are items to be checked each 25, 50, 100
hours and annual. Also there are notes on special items which may require servicing at more frequent intervals.
• When conducting an inspection at 25 hours, all items marked for 25 hours would be accomplished.
• When conducting an inspection at 50 hours, the 25 and 50-hour items would be accomplished.
• When conducting an inspection at 100 hours, the 25, 50, and 100-hour items would be accomplished.
• When conducting an Annual inspection, the 25, 50, 100, and Annual items would be accomplished.
Below is a list of recommended lubricants and “protection” products when servicing float hull, amphibious
components, and firebombing equipment. This lists products used by Wipaire during assembly of the floats.
There may be equivalent products just as satisfactory for protection. However, it is recommended if trying different
products, to inspect them frequently so as to determine their effectiveness.
Protection of nuts, bolts, hydraulic lines or metal surfaces
Dinitrol AV30 - Dinol Group
CRC – SP400 Soft Seal - CRC Industries
General Lubricants
LPS 1, LPS 2 and LPS 3 - LPS Industries
Wheel Bearings
*HCF Grease, P/N 605 - HCF Industries
*Aeroshell 22 - Shell Global Solutions
*Green Grease, Multi-Purpose - Green Grease Inc.
*Aviation Grease SHC 100 - ExxonMobil Aviation Lubricants
Rust Protection
Boeshield T9 Rut Protection - Boeing Company
ACF-50 Rust Protection
Tef-Gel - Ultra Safety Systems, Inc.
Corrosion X - Corrosion Technologies Corporation
14.1 SERVICE SCHEDULE
CHAPTER 14 - CONTINUED AIRWORTHINESS
