Wintriss SmartPAC 2, User Manual

Page: 196 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
4-10 Initialization Mode
PRESS NAME
(INITIALIZATION – PRESS NAME)
This item enables you to name the press on which SmartPAC 2 is installed. When you select
PRESS NAME, the Alphabetic Entry window opens (see Figure 4-6), allowing you to enter
the characters composing the press name you want, using any combination of alphabetic
characters, numbers and symbols.
To enter a press name in the Alphabetic Entry window, do the following:
1.
To key in letters and symbols, highlight each character, using the Up (

), Down (

), Left
(

), and Right (

) cursor keys, then press ENTER. Pressing the CLEAR key clears the
text.
To key in numbers, use the numeric keypad, then press ENTER.
2.
To accept your entry, press F6 . To cancel your selection, press RESET.
SELECT CAM NAMES (Optional)
(INITIALIZATION – SET CAM NAMES)
This item, which appears on the Main Initialization Menu only if your SmartPAC 2 is
equipped with ProCamPAC, allows you to assign descriptive names to each of your cam
channels. You can name up to 16 channels, depending on your SmartPAC 2 configuration
(i.e., 8-channel or 16-channel ProCamPAC). Do the following to assign cam channel names:
You can use a separate computer keyboard to enter the press name. See page 4-68.
Figure 4-6. Alphabetic Entry Window
CAM NAMES ENTERED IN INITIALIZATION APPLY TO ALL TOOLS
The names you assign to cam channels in Initialization apply to all tools. If, for example, you
“custom-name” Channel 1 as “Bypass 3,” then Channel 1 is “Bypass 3” for every tool loaded.
NOTICE
NOTICE