
V1
6
Winton WAM
2. INSTALLATION & SET UP
Safety: Ensure tractor and machine is stopped & keys out of ignition before set-up/maintenance.
Safety: Before attaching/detaching machinery ensure the hydraulic lift system is in a neutral position.
Safety: Make sure the PTO drive isn’t connected at any point until instructed to do so.
Attaching To The Tractor
On a flat area of ground with good access, lower the three point linkage on your tractor in line with
the machine linkage and then follow these steps:
1.
Attach tractor lower link arms to the frame using the lower link pins.
2.
Then fit the top linkage point bracket A to your tractor.
3.
Attach the 3x top link arms B & C to the top bracket A using top link pin D.
4.
Secure arms B to both sides of the machines lower link points using the inside of the pins.
5.
Ensure tractor lower link check chains are tight to stop the unit swinging sideways.
6.
Then fit arm C to the top link point on the machine using the top link pin.
7.
Attach the lever/controls
8.
Adjust the length of arms B & C so the body & A-frame of the machine is vertical.
A
B
C
C
B
D
Summary of Contents for WAM Series
Page 40: ...www wintonmachinery co uk ...